How to make paver bricks with paver brick molds？

News 2023年12月21日 147

Plastic paver block molds are used to create paver blocks. Here are the general steps for using plastic paver block molds:

1.Prepare the mold: Clean the mold and apply a release agent to prevent the plastic from sticking to the mold. You can use release agent or vegetable oil such as olive oil.

2.Mix the concrete: Mix according to the manufacturer’s instructions. You can use a pre-mixed concrete or mix your own concrete.

3.Pour the concrete: Pour the concrete into the mold, filling it to the top. You can use a ladle or a pouring device to pour the concrete.

4.Release the air bubbles: Tap the mold gently on a hard surface to release any air bubbles trapped in the concrete.

5.Let it cool: Allow the concrete to cool and solidify inside the mold. The cooling time will depend on the type of concrete used.

6.Remove the mold: Carefully peel the mold away from the concrete block. If the concrete sticks to the mold, use a thin metal tool to gently pry it loose.

7.Finish the block: Trim any excess concrete from the edges of the block and smooth out any rough spots using sandpaper or a file.

Repeat these steps to create as many paver blocks as you need. Note that the exact process may vary depending on the specific mold and concrete you are using, so always follow the manufacturer’s instructions.

If you are interested in it, please contact me.