Which Mould is best for paver block?

News 2024年3月28日 88

As a paving brick mold manufacturer with more than 10 years of experience, we have not only developed plastic molds but also rubber molds, can provide customers with more than 200 designs of paving brick molds, and can also provide customers with complete production process training and raw material supporting support.

The role of the paver mold is very extensive, the use of this paver mold can beautify the environment, so as to achieve a role in protecting the environment, and the paver tile mold is relatively environmentally friendly, and the service life is relatively long.

So, what is the approximate production process of paver tiles?

1.Raw materials: 42.5# Portland cement, washed sand, stones (5-10mm), naphthalene water reducer, and powder brightener.

2.Mix the concrete cement layer and the color layer according to a certain proportion；keep stirring continuously for 10-15 minutes.

3.Water reducing agent and brightener should be kept at 0.3% of the total amount of concrete cement.

4.Stir the prepared materials according to the proportion for 10 minutes, and pour the first layer of the mixed color layer into the mold to keep the material uniform thickness more than 10mm, vibrate for 10-15 seconds in time until the air bubbles in the concrete are vibrated out, then pour the second layer of concrete into the plastic mold and vibrate again for 5-10 seconds and smooth.

5.Convey the mold filled with concrete to the drying room, install or place a heating table in the drying room, keep the indoor temperature at 50 degrees, and release the mold after placing it for 10-15 hours.

Any needs later, welcome to contact us here.