Paving block rubber mold-Which Mould is best for paver block?

News 2024年8月12日 52

Paving block rubber molds are used to create concrete or cement paving blocks with various patterns and designs. These molds are flexible and durable, allowing for easy demolding and multiple uses.

Here’s a general overview of the process involved in using paving block rubber molds:

Mold Preparation: Apply a release agent to the inside of the rubber molds to prevent the concrete from sticking.

Pouring the Concrete: Pour the prepared concrete mixture into the rubber molds, making sure it fills all the desired areas and achieves the desired thickness. Use a trowel or similar tool to level the surface of the concrete.

Vibrating and Leveling: Use a vibrating table or a handheld vibrator to remove air bubbles and ensure that the concrete is evenly distributed within the molds.

Curing: Allow the concrete to cure and harden within the molds. The curing time can vary depending on the specific materials used and environmental conditions.

Demolding: Once the concrete has cured sufficiently, carefully remove the rubber molds from the hardened paving blocks. This process may require some gentle tapping, flexing, or use of release agents to ensure the blocks don’t stick to the molds. Take care not to damage the blocks during demolding